Automatic Reset Thermostat With Aluminum Cap, Ceramic Body For
Overheating Protection
Automatic reset thermostat is a kind of temperature control switch.
Working principle is that as the ambient temperature changes to the
set or reset temperature, physical deformation and some other
special effects occur inside the switch automatically, to turn a
circuit on or off, to make temperature controlled in a required
range, protecting the whole machine unit and operators.
1. Parameters.
| Manufacturer | Light Country(Changshu) Co.,Ltd. |
| Product | Automatic Reset Thermostat |
| Electrical Rating | 16A 250V, 15A 125V, 10A 250V |
| Operating Temperature | 0℃~250℃ |
| Operating life | 100,000 cycles. |
| Differential | 15k is the standard, also support customer's request. |
| CAP | Round aluminum cap |
| Case | Ceramic |
| Terminal Orientation | 0° |
| Terminal Material | Steel with nickle plated. |
| Terminal Size | 6.35mm |
| Circuit Resistance | 50mΩ or less |
| Insulation Resistance | 100MΩ or more(DC 500V) |
| Dielectric Strength | AC 1250V for one minute. |
| Unit Weight | 5.2g. |
When using thermostat, recommend to choose following wires
considering rated current:
| Rated current | ≤3A | ≤5A | ≤7A | ≤12A |
| Traverse area | 0.3 mm² | 0.5 mm² | 0.75 mm² | 1.25 mm² |
| UL wire gauge | AWG22 | AWG20 | AWG18 | AWG16 |
| Rated current | ≤15A | ≤20A | ≤30A | -- |
| Traverse area | 2.0 | 3.5 | 5.5 | -- |
| UL wire gauge | AWG14 | AWG12 | AWG10 | -- |
2. Advantages for Automatic Reset Thermostat.
1). Easy mounting.
2). Rapid heat transmission, high sensitivity for fast action and
overheating protection.
3). High precision without breakdown, no flashover.
4). High durability, high loading capacity.
5). Every product would be tested, extremely high temperature pass
rate.
3. Attentions about Automatic Reset Thermosat Installations.
1) The operating temperature of automatic reset thermostat is
tested at the rate of 1℃/ min in the hot air circulating oven.
Therefore, when select the thermostat, you can choose the
temperature according to your operating conditions. We recommend
that you confirm that through both normal and abnormal status.
2) During thermostat installation, need high attention that the
temperature-sensitive surface should not be deformed, and the top
of the cap should not be collapsed or deformed, so as not to affect
the temperature performance and electrical performance of the
product.
3) During using process, need high attention to avoid cracks caused
by the large force on the case inside, and liquid penetrates into
the thermostat. Keep the case clean to prevent the insulation
performance from decreasing or even short circuit breakdown after
the thermostat polluted by the conductive medium.
4. FAQ.
Q1: How can we get a quote?
A: Please offer automatic reset thermostat's detail specification,
such as operating temperature, case/bracket style, application,
quantity etc. Picture or drawing are welcome for our reference.
Q2: How can we get a drawing?
A: After confirm the detail specification, we will provide the
drawing via E-mail, WhatsApp, Wechat and other ways.
Q3: What about the lead time?
A: less than 1 week for sample making.
20~30 days for mass production.
We will try best to shorten the lead time if any urgent order.
Q4: Express or Forwarder for delivery.
A: Customer could assign a express or forwarder for delivery, or we
ask our source to do it if it's more cost-saving.
5. If the picture product could not meet your requirements, you can
refer to below KSD301 Thermostat Simple Specification with some common Component Options for best pricing support.
You can find which style could meet your requirement, or share your
detail demand(specification/pictures), we will support customized
production.
6. About us.
Light Country Co., Ltd. was founded in 1985 in Taiwan, Dongguan
branch in 1997, Changshu site in 2004.
We dedicate on thermostat and rocker switch.
These parts are widely used in household appliance, office
equipment, industrial facilities, motor vehicles and so on.
They could be customized designed based on customer's demand.
To provide customer best service, we’re with integration of
R&D, production, sales and post-sales as well.
Our products already got CQC, UL/CUL, VDE, TUV, SEMKO, NEMKO
certificates, comply with ROHS/REACH regulations.
Our factory already got ISO9001, ISO14001, IATF16949 certificates.
We promise high quality products, timely delivery, attentive
service, effective improvements.
Thanks for your time, please feel free to contact us via below
ways,
Sales: Thomas Lee/Julie Liu
Tel: +86 138 6234 1050/+86 180 2126 2273
Mail: lixin@liangqundianzi.cn or ksd301@aliyun.com.cn
WhatsApp: +86 15850802713
