Good Quality T23 Manual Reset Temperature Switch With Hexagonal
Copper Head For Dry Burning-Resistant Protection
Manual reset temperature switch is one of a thermal controller. As
the working ambient temperature changes to the required action
temperature, physical deformation and some other special effects
happen inside the switch automatically, to turn off the circuit, to
protect the whole machine unit and operators. It need to be reset
manually.
1. Why choose Manual Reset Temperature Switch?
1) High sensitivity, rapid heat transmission, for excellent
temperature control.
2) Easy mounting.
3) Many choices for temperature switch components, always support
customized production.
4) All finish goods will be tested before shipping, high pass rate.
2. Parameters.
| Factory | Light Country(Changshu) Co., Ltd. |
| Product | Manual Reset Temperature switch |
| Type | Single pole, single throw |
| Height | 9.6mm |
| Cap material | Hexagonal screw copper head |
| Screw spec | M4*0.7*6 |
| Case material | PPS |
| Terminal material | Copper with tin plated |
| Terminal size | 4.75mm |
| Terminal orientation | 0° |
| Electrical Rating | 16A 250V AC, 10A 250V AC, 15A 125VAC |
| Action temperature | 0℃~180℃ |
| Differential | 8K~30K, 15K is the standard |
| Temp Tolerance | Operating Temp. ±3 Returning Temp. ±4 |
| Circuit Resistant | Less than 50mΩ |
| Insulation Resistance | 100MΩ min. at DC 500V |
| Dielectric Strength | AC 1250V for one minute |
| Operating Life | 100,000 cycles. |
| Function | For dry burnning resistant protection |
3. Attentions about Manual Reset Temperature Switch installation.
1) During installation, need high attention that the
temperature-sensitive surface should not be deformed, and the top
of the cap should not be collapsed or deformed, so as not to affect
the temperature performance and electrical performance of the
product.
2) Manual resest temperature switch shall be installed with cap
connected with the grounding metal parts or the power grounding
wire of the equipment to reduce the electromagnetic radiation and
interference signals of the complete machine.
3) Manual reset series temperature switch can only be reset after
the temperature drops at least 20℃; And when reset, the force
should be moderate, to just can make the thermostat reset as
appropriate (about 5~6N), otherwise there is an impact on the
temperature.
4. If the picture product could not meed your demand, please refer to
below KSD301 Thermostat Specification for some common components for best price support. Kindly share
your specification details such as action/reset temperature,
bracket, terminal types... with us. We will support customized
production.
5. About us.
Light Country was founded in 1985 in Taiwan.
We dedicate on temperature switch and rocker switch.
These parts are widely used in household appliance, motor vehicles,
industrial facilities, medical devices, etc.
To provide customer best service, we’re with integration of
R&D, production, sales and post-sales as well.
Our factory already got ISO9001, ISO14001, IATF16949 certificates.
Our products already got CQC, UL/CUL, VDE, TUV, SEMKO, NEMKO
certificates, comply with ROHS/REACH regulations.
We promise high quality products, timely delivery, attentive
service, effective improvements.
We deserve your trust.
Thanks for your time, please feel free to contact us via below
ways,
Sales: Thomas Lee/Julie Liu
Tel: +86 138 6234 1050/+86 180 2126 2273
Mail: lixin@liangqundianzi.cn or ksd301@aliyun.com.cn
WhatsApp: +86 15850802713
